Request and response objectsLink to this heading

Quick overviewLink to this heading

Django uses request and response objects to pass state through the system.

When a page is requested, Django creates an HttpRequest object that contains metadata about the request. Then Django loads the appropriate view, passing the HttpRequest as the first argument to the view function. Each view is responsible for returning an HttpResponse object.

This document explains the APIs for HttpRequest and HttpResponse objects, which are defined in the django.http module.

`HttpRequest` objectsLink to this heading

class HttpRequestLink to this definition

AttributesLink to this heading

All attributes should be considered read-only, unless stated otherwise.

HttpRequest.schemeLink to this definition: A string representing the scheme of the request (http or https usually).

HttpRequest.bodyLink to this definition

The raw HTTP request body as a bytestring. This is useful for processing data in different ways than conventional HTML forms: binary images, XML payload etc. For processing conventional form data, use HttpRequest.POST.

You can also read from an HttpRequest using a file-like interface with HttpRequest.read() or HttpRequest.readline(). Accessing the body attribute after reading the request with either of these I/O stream methods will produce a RawPostDataException.

HttpRequest.pathLink to this definition

A string representing the full path to the requested page, not including the scheme, domain, or query string.

Example: "/music/bands/the_beatles/"

HttpRequest.path_infoLink to this definition

Under some web server configurations, the portion of the URL after the host name is split up into a script prefix portion and a path info portion. The path_info attribute always contains the path info portion of the path, no matter what web server is being used. Using this instead of path can make your code easier to move between test and deployment servers.

For example, if the WSGIScriptAlias for your application is set to "/minfo", then path might be "/minfo/music/bands/the_beatles/" and path_info would be "/music/bands/the_beatles/".

HttpRequest.methodLink to this definition

A string representing the HTTP method used in the request. This is guaranteed to be uppercase. For example:

Code

if request.method == "GET":
    do_something()
elif request.method == "POST":
    do_something_else()

HttpRequest.encodingLink to this definition: A string representing the current encoding used to decode form submission data (or None, which means the DEFAULT_CHARSET setting is used). You can write to this attribute to change the encoding used when accessing the form data. Any subsequent attribute accesses (such as reading from GET or POST) will use the new encoding value. Useful if you know the form data is not in the DEFAULT_CHARSET encoding.

HttpRequest.content_typeLink to this definition: A string representing the MIME type of the request, parsed from the CONTENT_TYPE header.

HttpRequest.content_paramsLink to this definition: A dictionary of key/value parameters included in the CONTENT_TYPE header.

HttpRequest.GETLink to this definition: A dictionary-like object containing all given HTTP GET parameters. See the QueryDict documentation below.

HttpRequest.POSTLink to this definition

A dictionary-like object containing all given HTTP POST parameters, providing that the request contains form data. See the QueryDict documentation below. If you need to access raw or non-form data posted in the request, access this through the HttpRequest.body attribute instead.

It’s possible that a request can come in via POST with an empty POST dictionary – if, say, a form is requested via the POST HTTP method but does not include form data. Therefore, you shouldn’t use if request.POST to check for use of the POST method; instead, use if request.method == "POST" (see HttpRequest.method).

POST does not include file-upload information. See FILES.

HttpRequest.COOKIESLink to this definition: A dictionary containing all cookies. Keys and values are strings.

HttpRequest.FILESLink to this definition

A dictionary-like object containing all uploaded files. Each key in FILES is the name from the <input type="file" name="">. Each value in FILES is an UploadedFile.

See Managing files for more information.

FILES will only contain data if the request method was POST and the <form> that posted to the request had enctype="multipart/form-data". Otherwise, FILES will be a blank dictionary-like object.

HttpRequest.METALink to this definition

A dictionary containing all available HTTP headers. Available headers depend on the client and server, but here are some examples:

CONTENT_LENGTH – The length of the request body (as a string).
CONTENT_TYPE – The MIME type of the request body.
HTTP_ACCEPT – Acceptable content types for the response.
HTTP_ACCEPT_ENCODING – Acceptable encodings for the response.
HTTP_ACCEPT_LANGUAGE – Acceptable languages for the response.
HTTP_HOST – The HTTP Host header sent by the client.
HTTP_REFERER – The referring page, if any.
HTTP_USER_AGENT – The client’s user-agent string.
QUERY_STRING – The query string, as a single (unparsed) string.
REMOTE_ADDR – The IP address of the client.
REMOTE_HOST – The hostname of the client.
REMOTE_USER – The user authenticated by the web server, if any.
REQUEST_METHOD – A string such as "GET" or "POST".
SERVER_NAME – The hostname of the server.
SERVER_PORT – The port of the server (as a string).

With the exception of CONTENT_LENGTH and CONTENT_TYPE, as given above, any HTTP headers in the request are converted to META keys by converting all characters to uppercase, replacing any hyphens with underscores and adding an HTTP_ prefix to the name. So, for example, a header called X-Bender would be mapped to the META key HTTP_X_BENDER.

Note that runserver strips all headers with underscores in the name, so you won’t see them in META. This prevents header-spoofing based on ambiguity between underscores and dashes both being normalizing to underscores in WSGI environment variables. It matches the behavior of web servers like Nginx and Apache 2.4+.

HttpRequest.headers is a simpler way to access all HTTP-prefixed headers, plus CONTENT_LENGTH and CONTENT_TYPE.

HttpRequest.headersLink to this definition

A case insensitive, dict-like object that provides access to all HTTP-prefixed headers (plus Content-Length and Content-Type) from the request.

The name of each header is stylized with title-casing (e.g. User-Agent) when it’s displayed. You can access headers case-insensitively:

Python console

>>> request.headers
{'User-Agent': 'Mozilla/5.0 (Macintosh; Intel Mac OS X 10_12_6', ...}

>>> "User-Agent" in request.headers
True
>>> "user-agent" in request.headers
True

>>> request.headers["User-Agent"]
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_12_6)
>>> request.headers["user-agent"]
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_12_6)

>>> request.headers.get("User-Agent")
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_12_6)
>>> request.headers.get("user-agent")
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_12_6)

For use in, for example, Django templates, headers can also be looked up using underscores in place of hyphens:

Django template

{{ request.headers.user_agent }}

HttpRequest.resolver_matchLink to this definition: An instance of ResolverMatch representing the resolved URL. This attribute is only set after URL resolving took place, which means it’s available in all views but not in middleware which are executed before URL resolving takes place (you can use it in process_view() though).

Attributes set by application codeLink to this heading

Django doesn’t set these attributes itself but makes use of them if set by your application.

HttpRequest.current_appLink to this definition: The url template tag will use its value as the current_app argument to reverse().

HttpRequest.urlconfLink to this definition

This will be used as the root URLconf for the current request, overriding the ROOT_URLCONF setting. See How Django processes a request for details.

urlconf can be set to None to revert any changes made by previous middleware and return to using the ROOT_URLCONF.

HttpRequest.exception_reporter_filterLink to this definition: This will be used instead of DEFAULT_EXCEPTION_REPORTER_FILTER for the current request. See Niestandardowe raporty błędów for details.

HttpRequest.exception_reporter_classLink to this definition: This will be used instead of DEFAULT_EXCEPTION_REPORTER for the current request. See Niestandardowe raporty błędów for details.

Attributes set by middlewareLink to this heading

Some of the middleware included in Django’s contrib apps set attributes on the request. If you don’t see the attribute on a request, be sure the appropriate middleware class is listed in MIDDLEWARE.

HttpRequest.sessionLink to this definition: From the SessionMiddleware: A readable and writable, dictionary-like object that represents the current session.

HttpRequest.siteLink to this definition: From the CurrentSiteMiddleware: An instance of Site or RequestSite as returned by get_current_site() representing the current site.

HttpRequest.userLink to this definition

From the AuthenticationMiddleware: An instance of AUTH_USER_MODEL representing the currently logged-in user. If the user isn’t currently logged in, user will be set to an instance of AnonymousUser. You can tell them apart with is_authenticated, like so:

Code

if request.user.is_authenticated:
    ...  # Do something for logged-in users.
else:
    ...  # Do something for anonymous users.

The auser() method does the same thing but can be used from async contexts.

MethodsLink to this heading

HttpRequest.auser()Link to this definition: From the AuthenticationMiddleware: Coroutine. Returns an instance of AUTH_USER_MODEL representing the currently logged-in user. If the user isn’t currently logged in, auser will return an instance of AnonymousUser. This is similar to the user attribute but it works in async contexts.

HttpRequest.get_host()Link to this definition

Returns the originating host of the request using information from the HTTP_X_FORWARDED_HOST (if USE_X_FORWARDED_HOST is enabled) and HTTP_HOST headers, in that order. If they don’t provide a value, the method uses a combination of SERVER_NAME and SERVER_PORT as detailed in PEP 3333.

Example: "127.0.0.1:8000"

Raises django.core.exceptions.DisallowedHost if the host is not in ALLOWED_HOSTS or the domain name is invalid according to RFC 1034/1035.

Informacja

The get_host() method fails when the host is behind multiple proxies. One solution is to use middleware to rewrite the proxy headers, as in the following example:

Code

class MultipleProxyMiddleware:
    FORWARDED_FOR_FIELDS = [
        "HTTP_X_FORWARDED_FOR",
        "HTTP_X_FORWARDED_HOST",
        "HTTP_X_FORWARDED_SERVER",
    ]

    def __init__(self, get_response):
        self.get_response = get_response

    def __call__(self, request):
        """
        Rewrites the proxy headers so that only the most
        recent proxy is used.
        """
        for field in self.FORWARDED_FOR_FIELDS:
            if field in request.META:
                if "," in request.META[field]:
                    parts = request.META[field].split(",")
                    request.META[field] = parts[-1].strip()
        return self.get_response(request)

This middleware should be positioned before any other middleware that relies on the value of get_host() – for instance, CommonMiddleware or CsrfViewMiddleware.

HttpRequest.get_port()Link to this definition: Returns the originating port of the request using information from the HTTP_X_FORWARDED_PORT (if USE_X_FORWARDED_PORT is enabled) and SERVER_PORT META variables, in that order.

HttpRequest.get_full_path()Link to this definition

Returns the path, plus an appended query string, if applicable.

Example: "/minfo/music/bands/the_beatles/?print=true"

HttpRequest.get_full_path_info()Link to this definition

Like get_full_path(), but uses path_info instead of path.

Example: "/music/bands/the_beatles/?print=true"

HttpRequest.build_absolute_uri(location=None)Link to this definition

Returns the absolute URI form of location. If no location is provided, the location will be set to request.get_full_path().

If the location is already an absolute URI, it will not be altered. Otherwise the absolute URI is built using the server variables available in this request. For example:

Python console

>>> request.build_absolute_uri()
'https://example.com/music/bands/the_beatles/?print=true'
>>> request.build_absolute_uri("/bands/")
'https://example.com/bands/'
>>> request.build_absolute_uri("https://example2.com/bands/")
'https://example2.com/bands/'

HttpRequest.get_signed_cookie(key, default=RAISE_ERROR, salt='', max_age=None)Link to this definition

Returns a cookie value for a signed cookie, or raises a django.core.signing.BadSignature exception if the signature is no longer valid. If you provide the default argument the exception will be suppressed and that default value will be returned instead.

The optional salt argument can be used to put the cookie into a separate signature namespace. If supplied, the max_age argument will be checked against the signed timestamp attached to the cookie value to ensure the cookie is not older than max_age seconds.

Cookies signed by older Django versions are accepted by default for backwards compatibility. Set SIGNED_COOKIE_LEGACY_SALT_FALLBACK to False to reject them.

For example:

Python console

>>> request.get_signed_cookie("name")
'Tony'
>>> request.get_signed_cookie("name", salt="name-salt")
'Tony' # assuming cookie was set using the same salt
>>> request.get_signed_cookie("nonexistent-cookie")
KeyError: 'nonexistent-cookie'
>>> request.get_signed_cookie("nonexistent-cookie", False)
False
>>> request.get_signed_cookie("cookie-that-was-tampered-with")
BadSignature: ...
>>> request.get_signed_cookie("name", max_age=60)
SignatureExpired: Signature age 1677.3839159 > 60 seconds
>>> request.get_signed_cookie("name", False, max_age=60)
False

See cryptographic signing for more information.

HttpRequest.is_secure()Link to this definition: Returns True if the request is secure; that is, if it was made with HTTPS.

HttpRequest.get_preferred_type(media_types)Link to this definition

Returns the preferred mime type from media_types, based on the Accept header, or None if the client does not accept any of the provided types.

Assuming the client sends an Accept header of text/html,application/json;q=0.8:

Python console

>>> request.get_preferred_type(["text/html", "application/json"])
"text/html"
>>> request.get_preferred_type(["application/json", "text/plain"])
"application/json"
>>> request.get_preferred_type(["application/xml", "text/plain"])
None

If the mime type includes parameters, these are also considered when determining the preferred media type. For example, with an Accept header of text/vcard;version=3.0,text/html;q=0.5, the return value of request.get_preferred_type() depends on the available media types:

Python console

>>> request.get_preferred_type(
...     [
...         "text/vcard; version=4.0",
...         "text/vcard; version=3.0",
...         "text/vcard",
...         "text/directory",
...     ]
... )
"text/vcard; version=3.0"
>>> request.get_preferred_type(
...     [
...         "text/vcard; version=4.0",
...         "text/html",
...     ]
... )
"text/html"
>>> request.get_preferred_type(
...     [
...         "text/vcard; version=4.0",
...         "text/vcard",
...         "text/directory",
...     ]
... )
None

(For further details on how content negotiation is performed, see RFC 9110 Section 12.5.1.)

Most browsers send Accept: */* by default, meaning they don’t have a preference, in which case the first item in media_types would be returned.

Setting an explicit Accept header in API requests can be useful for returning a different content type for those consumers only. See Content negotiation example for an example of returning different content based on the Accept header.

HttpRequest.accepts(mime_type)Link to this definition

Returns True if the request’s Accept header matches the mime_type argument:

Python console

>>> request.accepts("text/html")
True

Most browsers send Accept: */* by default, so this would return True for all content types.

See Content negotiation example for an example of using accepts() to return different content based on the Accept header.

HttpRequest.read(size=None)Link to this definition

HttpRequest.readline()Link to this definition

HttpRequest.readlines()Link to this definition

HttpRequest.__iter__()Link to this definition

Methods implementing a file-like interface for reading from an HttpRequest instance. This makes it possible to consume an incoming request in a streaming fashion. A common use-case would be to process a big XML payload with an iterative parser without constructing a whole XML tree in memory.

Given this standard interface, an HttpRequest instance can be passed directly to an XML parser such as ElementTree:

Code

import xml.etree.ElementTree as ET

for element in ET.iterparse(request):
    process(element)

`QueryDict` objectsLink to this heading

class QueryDictLink to this definition

In an HttpRequest object, the GET and POST attributes are instances of django.http.QueryDict, a dictionary-like class customized to deal with multiple values for the same key. This is necessary because some HTML form elements, notably <select multiple>, pass multiple values for the same key.

The QueryDicts at request.POST and request.GET will be immutable when accessed in a normal request/response cycle. To get a mutable version you need to use QueryDict.copy().

MethodsLink to this heading

QueryDict implements all the standard dictionary methods because it’s a subclass of dictionary. Exceptions are outlined here:

QueryDict.__init__(query_string=None, mutable=False, encoding=None)Link to this definition

Instantiates a QueryDict object based on query_string.

Python console

>>> QueryDict("a=1&a=2&c=3")
<QueryDict: {'a': ['1', '2'], 'c': ['3']}>

If query_string is not passed in, the resulting QueryDict will be empty (it will have no keys or values).

Most QueryDicts you encounter, and in particular those at request.POST and request.GET, will be immutable. If you are instantiating one yourself, you can make it mutable by passing mutable=True to its __init__().

Strings for setting both keys and values will be converted from encoding to str. If encoding is not set, it defaults to DEFAULT_CHARSET.

classmethod QueryDict.fromkeys(iterable, value='', mutable=False, encoding=None)Link to this definition

Creates a new QueryDict with keys from iterable and each value equal to value. For example:

Python console

>>> QueryDict.fromkeys(["a", "a", "b"], value="val")
<QueryDict: {'a': ['val', 'val'], 'b': ['val']}>

QueryDict.__getitem__(key)Link to this definition

Returns the last value for the given key; or an empty list ([]) if the key exists but has no values. Raises django.utils.datastructures.MultiValueDictKeyError if the key does not exist. (This is a subclass of Python’s standard KeyError, so you can stick to catching KeyError.)

Python console

>>> q = QueryDict("a=1&a=2&a=3", mutable=True)
>>> q.__getitem__("a")
'3'
>>> q.__setitem__("b", [])
>>> q.__getitem__("b")
[]

QueryDict.__setitem__(key, value)Link to this definition: Sets the given key to [value] (a list whose single element is value). Note that this, as other dictionary functions that have side effects, can only be called on a mutable QueryDict (such as one that was created via QueryDict.copy()).

QueryDict.__contains__(key)Link to this definition: Returns True if the given key is set. This lets you do, e.g., if "foo" in request.GET.

QueryDict.get(key, default=None)Link to this definition: Uses the same logic as __getitem__(), with a hook for returning a default value if the key doesn’t exist.

QueryDict.setdefault(key, default=None)Link to this definition: Like dict.setdefault(), except it uses __setitem__() internally.

QueryDict.update(other_dict)Link to this definition

Takes either a QueryDict or a dictionary. Like dict.update(), except it appends to the current dictionary items rather than replacing them. For example:

Python console

>>> q = QueryDict("a=1", mutable=True)
>>> q.update({"a": "2"})
>>> q.getlist("a")
['1', '2']
>>> q["a"]  # returns the last
'2'

QueryDict.items()Link to this definition

Like dict.items(), except this uses the same last-value logic as __getitem__() and returns an iterator object instead of a view object. For example:

Python console

>>> q = QueryDict("a=1&a=2&a=3")
>>> list(q.items())
[('a', '3')]

QueryDict.values()Link to this definition

Like dict.values(), except this uses the same last-value logic as __getitem__() and returns an iterator instead of a view object. For example:

Python console

>>> q = QueryDict("a=1&a=2&a=3")
>>> list(q.values())
['3']

In addition, QueryDict has the following methods:

QueryDict.copy()Link to this definition: Returns a copy of the object using copy.deepcopy(). This copy will be mutable even if the original was not.

QueryDict.getlist(key, default=None)Link to this definition: Returns a list of the data with the requested key. Returns an empty list if the key doesn’t exist and default is None. It’s guaranteed to return a list unless the default value provided isn’t a list.

QueryDict.setlist(key, list_)Link to this definition: Sets the given key to list_ (unlike __setitem__()).

QueryDict.appendlist(key, item)Link to this definition: Appends an item to the internal list associated with key.

QueryDict.setlistdefault(key, default_list=None)Link to this definition: Like setdefault(), except it takes a list of values instead of a single value.

QueryDict.lists()Link to this definition

Like items(), except it includes all values, as a list, for each member of the dictionary. For example:

Python console

>>> q = QueryDict("a=1&a=2&a=3")
>>> q.lists()
[('a', ['1', '2', '3'])]

QueryDict.pop(key)Link to this definition

Returns a list of values for the given key and removes them from the dictionary. Raises KeyError if the key does not exist. For example:

Python console

>>> q = QueryDict("a=1&a=2&a=3", mutable=True)
>>> q.pop("a")
['1', '2', '3']

QueryDict.popitem()Link to this definition

Removes an arbitrary member of the dictionary (since there’s no concept of ordering), and returns a two value tuple containing the key and a list of all values for the key. Raises KeyError when called on an empty dictionary. For example:

Python console

>>> q = QueryDict("a=1&a=2&a=3", mutable=True)
>>> q.popitem()
('a', ['1', '2', '3'])

QueryDict.dict()Link to this definition

Returns a dict representation of QueryDict. For every (key, list) pair in QueryDict, dict will have (key, item), where item is one element of the list, using the same logic as QueryDict.__getitem__():

Python console

>>> q = QueryDict("a=1&a=3&a=5")
>>> q.dict()
{'a': '5'}

QueryDict.urlencode(safe=None)Link to this definition

Returns a string of the data in query string format. For example:

Python console

>>> q = QueryDict("a=2&b=3&b=5")
>>> q.urlencode()
'a=2&b=3&b=5'

Use the safe parameter to pass characters which don’t require encoding. For example:

Python console

>>> q = QueryDict(mutable=True)
>>> q["next"] = "/a&b/"
>>> q.urlencode(safe="/")
'next=/a%26b/'

`HttpResponse` objectsLink to this heading

class HttpResponseLink to this definition

In contrast to HttpRequest objects, which are created automatically by Django, HttpResponse objects are your responsibility. Each view you write is responsible for instantiating, populating, and returning an HttpResponse.

The HttpResponse class lives in the django.http module.

UsageLink to this heading

Passing stringsLink to this heading

Typical usage is to pass the contents of the page, as a string, bytestring, or memoryview, to the HttpResponse constructor:

Python console

>>> from django.http import HttpResponse
>>> response = HttpResponse("Here's the text of the web page.")
>>> response = HttpResponse("Text only, please.", content_type="text/plain")
>>> response = HttpResponse(b"Bytestrings are also accepted.")
>>> response = HttpResponse(memoryview(b"Memoryview as well."))

But if you want to add content incrementally, you can use response as a file-like object:

Python console

>>> response = HttpResponse()
>>> response.write("<p>Here's the text of the web page.</p>")
>>> response.write("<p>Here's another paragraph.</p>")

Passing iteratorsLink to this heading

Finally, you can pass HttpResponse an iterator rather than strings. HttpResponse will consume the iterator immediately, store its content as a string, and discard it. Objects with a close() method such as files and generators are immediately closed.

If you need the response to be streamed from the iterator to the client, you must use the StreamingHttpResponse class instead.

Setting header fieldsLink to this heading

To set or remove a header field in your response, use HttpResponse.headers:

Python console

>>> response = HttpResponse()
>>> response.headers["Age"] = 120
>>> del response.headers["Age"]

You can also manipulate headers by treating your response like a dictionary:

Python console

>>> response = HttpResponse()
>>> response["Age"] = 120
>>> del response["Age"]

This proxies to HttpResponse.headers, and is the original interface offered by HttpResponse.

When using this interface, unlike a dictionary, del doesn’t raise KeyError if the header field doesn’t exist.

You can also set headers on instantiation:

Python console

>>> response = HttpResponse(headers={"Age": 120})

For setting the Cache-Control and Vary header fields, it is recommended to use the patch_cache_control() and patch_vary_headers() methods from django.utils.cache, since these fields can have multiple, comma-separated values. The „patch” methods ensure that other values, e.g. added by a middleware, are not removed.

HTTP header fields cannot contain newlines. An attempt to set a header field containing a newline character (CR or LF) will raise BadHeaderError

Telling the browser to treat the response as a file attachmentLink to this heading

To tell the browser to treat the response as a file attachment, set the Content-Type and Content-Disposition headers. For example, this is how you might return a Microsoft Excel spreadsheet:

Python console

>>> response = HttpResponse(
...     my_data,
...     headers={
...         "Content-Type": "application/vnd.ms-excel",
...         "Content-Disposition": 'attachment; filename="foo.xls"',
...     },
... )

There’s nothing Django-specific about the Content-Disposition header, but it’s easy to forget the syntax, so we’ve included it here.

AttributesLink to this heading

HttpResponse.contentLink to this definition: A bytestring representing the content, encoded from a string if necessary.

HttpResponse.textLink to this definition: New in Django 5.2

A string representation of HttpResponse.content, decoded using the response’s HttpResponse.charset (defaulting to UTF-8 if empty).

HttpResponse.cookiesLink to this definition: A http.cookies.SimpleCookie object holding the cookies included in the response.

HttpResponse.headersLink to this definition: A case insensitive, dict-like object that provides an interface to all HTTP headers on the response, except a Set-Cookie header. See Setting header fields and HttpResponse.cookies.

HttpResponse.charsetLink to this definition: A string denoting the charset in which the response will be encoded. If not given at HttpResponse instantiation time, it will be extracted from content_type and if that is unsuccessful, the DEFAULT_CHARSET setting will be used.

HttpResponse.status_codeLink to this definition

The HTTP status code for the response.

Unless reason_phrase is explicitly set, modifying the value of status_code outside the constructor will also modify the value of reason_phrase.

HttpResponse.reason_phraseLink to this definition

The HTTP reason phrase for the response. It uses the HTTP standard’s default reason phrases.

Unless explicitly set, reason_phrase is determined by the value of status_code.

HttpResponse.streamingLink to this definition

This is always False.

This attribute exists so middleware can treat streaming responses differently from regular responses.

HttpResponse.closedLink to this definition: True if the response has been closed.

MethodsLink to this heading

HttpResponse.__init__(content=b'', content_type=None, status=200, reason=None, charset=None, headers=None)Link to this definition

Instantiates an HttpResponse object with the given page content, content type, and headers.

content is most commonly an iterator, bytestring, memoryview, or string. Other types will be converted to a bytestring by encoding their string representation. Iterators should return strings or bytestrings and those will be joined together to form the content of the response.

content_type is the MIME type optionally completed by a character set encoding and is used to fill the HTTP Content-Type header. If not specified, it is formed by 'text/html' and the DEFAULT_CHARSET settings, by default: "text/html; charset=utf-8".

status is the HTTP status code for the response. You can use Python’s http.HTTPStatus for meaningful aliases, such as HTTPStatus.NO_CONTENT.

reason is the HTTP response phrase. If not provided, a default phrase will be used.

charset is the charset in which the response will be encoded. If not given it will be extracted from content_type, and if that is unsuccessful, the DEFAULT_CHARSET setting will be used.

headers is a dict of HTTP headers for the response.

HttpResponse.__setitem__(header, value)Link to this definition: Sets the given header name to the given value. Both header and value should be strings.

HttpResponse.__delitem__(header)Link to this definition: Deletes the header with the given name. Fails silently if the header doesn’t exist. Case-insensitive.

HttpResponse.__getitem__(header)Link to this definition: Returns the value for the given header name. Case-insensitive.

HttpResponse.get(header, alternate=None)Link to this definition: Returns the value for the given header, or an alternate if the header doesn’t exist.

HttpResponse.has_header(header)Link to this definition: Returns True or False based on a case-insensitive check for a header with the given name.

HttpResponse.items()Link to this definition: Acts like dict.items() for HTTP headers on the response.

HttpResponse.setdefault(header, value)Link to this definition: Sets a header unless it has already been set.

HttpResponse.set_cookie(key, value='', max_age=None, expires=None, path='/', domain=None, secure=False, httponly=False, samesite=None)Link to this definition

Sets a cookie. The parameters are the same as in the Morsel cookie object in the Python standard library.

max_age should be a timedelta object, an integer number of seconds, or None (default) if the cookie should last only as long as the client’s browser session. If expires is not specified, it will be calculated.
expires should either be a string in the format "Wdy, DD-Mon-YY HH:MM:SS GMT" or a datetime.datetime object in UTC. If expires is a datetime object, the max_age will be calculated.
Use domain if you want to set a cross-domain cookie. For example, domain="example.com" will set a cookie that is readable by the domains www.example.com, blog.example.com, etc. Otherwise, a cookie will only be readable by the domain that set it.
Use secure=True if you want the cookie to be only sent to the server when a request is made with the https scheme.
Use httponly=True if you want to prevent client-side JavaScript from having access to the cookie.

HttpOnly is a flag included in a Set-Cookie HTTP response header. It’s part of the RFC 6265 standard for cookies and can be a useful way to mitigate the risk of a client-side script accessing the protected cookie data.
Use samesite='Strict' or samesite='Lax' to tell the browser not to send this cookie when performing a cross-origin request. SameSite isn’t supported by all browsers, so it’s not a replacement for Django’s CSRF protection, but rather a defense in depth measure.

Use samesite='None' (string) to explicitly state that this cookie is sent with all same-site and cross-site requests.

HttpResponse.set_signed_cookie(key, value, salt='', max_age=None, expires=None, path='/', domain=None, secure=False, httponly=False, samesite=None)Link to this definition: Like set_cookie(), but cryptographic signing the cookie before setting it. Use in conjunction with HttpRequest.get_signed_cookie(). You can use the optional salt argument to put the cookie into a separate signature namespace, but you will need to remember to pass it to the corresponding HttpRequest.get_signed_cookie() call.

HttpResponse.delete_cookie(key, path='/', domain=None, samesite=None)Link to this definition

Deletes the cookie with the given key. Fails silently if the key doesn’t exist.

Due to the way cookies work, path and domain should be the same values you used in set_cookie() – otherwise the cookie may not be deleted.

HttpResponse.close()Link to this definition: This method is called at the end of the request directly by the WSGI or ASGI server.

HttpResponse.write(content)Link to this definition: This method makes an HttpResponse instance a file-like object.

HttpResponse.flush()Link to this definition: This method makes an HttpResponse instance a file-like object.

HttpResponse.tell()Link to this definition: This method makes an HttpResponse instance a file-like object.

HttpResponse.getvalue()Link to this definition: Returns the value of HttpResponse.content. This method makes an HttpResponse instance a stream-like object.

HttpResponse.readable()Link to this definition: Always False. This method makes an HttpResponse instance a stream-like object.

HttpResponse.seekable()Link to this definition: Always False. This method makes an HttpResponse instance a stream-like object.

HttpResponse.writable()Link to this definition: Always True. This method makes an HttpResponse instance a stream-like object.

HttpResponse.writelines(lines)Link to this definition: Writes a list of lines to the response. Line separators are not added. This method makes an HttpResponse instance a stream-like object.

`HttpResponse` subclassesLink to this heading

Django includes a number of HttpResponse subclasses that handle different types of HTTP responses. Like HttpResponse, these subclasses live in django.http.

class HttpResponseRedirectLink to this definition

The first argument to the constructor is required – the path to redirect to. This can be a fully qualified URL (e.g. 'https://www.yahoo.com/search/'), an absolute path with no domain (e.g. '/search/'), or even a relative path (e.g. 'search/'). In that last case, the client browser will reconstruct the full URL itself according to the current path.

The constructor accepts an optional preserve_request keyword argument that defaults to False, producing a response with a 302 status code. If preserve_request is True, the status code will be 307 instead.

See HttpResponse for other optional constructor arguments.

urlLink to this definition: This read-only attribute represents the URL the response will redirect to (equivalent to the Location response header).

class HttpResponsePermanentRedirectLink to this definition: Like HttpResponseRedirect, but it returns a permanent redirect (HTTP status code 301) instead of a „found” redirect (status code 302). When preserve_request=True, the response’s status code is 308.

Changed in Django 5.2
The preserve_request argument was added.

class HttpResponseNotModifiedLink to this definition: The constructor doesn’t take any arguments and no content should be added to this response. Use this to designate that a page hasn’t been modified since the user’s last request (status code 304).

class HttpResponseBadRequestLink to this definition: Acts just like HttpResponse but uses a 400 status code.

class HttpResponseNotFoundLink to this definition: Acts just like HttpResponse but uses a 404 status code.

class HttpResponseForbiddenLink to this definition: Acts just like HttpResponse but uses a 403 status code.

class HttpResponseNotAllowedLink to this definition: Like HttpResponse, but uses a 405 status code. The first argument to the constructor is required: a list of permitted methods (e.g. ['GET', 'POST']).

class HttpResponseGoneLink to this definition: Acts just like HttpResponse but uses a 410 status code.

class HttpResponseServerErrorLink to this definition: Acts just like HttpResponse but uses a 500 status code.

Custom response classesLink to this heading

If you find yourself needing a response class that Django doesn’t provide, you can create it with the help of http.HTTPStatus. For example:

Code

from http import HTTPStatus
from django.http import HttpResponse


class HttpResponseNoContent(HttpResponse):
    status_code = HTTPStatus.NO_CONTENT

`JsonResponse` objectsLink to this heading

class JsonResponse(data, encoder=DjangoJSONEncoder, safe=True, json_dumps_params=None, **kwargs)Link to this definition

An HttpResponse subclass that helps to create a JSON-encoded response. It inherits most behavior from its superclass with a couple differences:

Its default Content-Type header is set to application/json.

The first parameter, data, should be a dict instance. If the safe parameter is set to False (see below) it can be any JSON-serializable object.

The encoder, which defaults to django.core.serializers.json.DjangoJSONEncoder, will be used to serialize the data. See JSON serialization for more details about this serializer.

The safe boolean parameter defaults to True. If it’s set to False, any object can be passed for serialization (otherwise only dict instances are allowed). If safe is True and a non-dict object is passed as the first argument, a TypeError will be raised.

The json_dumps_params parameter is a dictionary of keyword arguments to pass to the json.dumps() call used to generate the response.

UsageLink to this heading

Typical usage could look like:

Python console

>>> from django.http import JsonResponse
>>> response = JsonResponse({"foo": "bar"})
>>> response.content
b'{"foo": "bar"}'

Serializing non-dictionary objectsLink to this heading

In order to serialize objects other than dict you must set the safe parameter to False:

Python console

>>> response = JsonResponse([1, 2, 3], safe=False)

Without passing safe=False, a TypeError will be raised.

Note that an API based on dict objects is more extensible, flexible, and makes it easier to maintain forwards compatibility. Therefore, you should avoid using non-dict objects in JSON-encoded response.

Changing the default JSON encoderLink to this heading

If you need to use a different JSON encoder class you can pass the encoder parameter to the constructor method:

Python console

>>> response = JsonResponse(data, encoder=MyJSONEncoder)

`StreamingHttpResponse` objectsLink to this heading

class StreamingHttpResponseLink to this definition

The StreamingHttpResponse class is used to stream a response from Django to the browser.

An example usage of StreamingHttpResponse under WSGI is streaming content when generating the response would take too long or uses too much memory. For instance, it’s useful for generating large CSV files.

There are performance considerations when doing this, though. Django, under WSGI, is designed for short-lived requests. Streaming responses will tie a worker process for the entire duration of the response. This may result in poor performance.

Generally speaking, you would perform expensive tasks outside of the request-response cycle, rather than resorting to a streamed response.

When serving under ASGI, however, a StreamingHttpResponse need not stop other requests from being served whilst waiting for I/O. This opens up the possibility of long-lived requests for streaming content and implementing patterns such as long-polling, and server-sent events.

Even under ASGI note, StreamingHttpResponse should only be used in situations where it is absolutely required that the whole content isn’t iterated before transferring the data to the client. Because the content can’t be accessed, many middleware can’t function normally. For example the ETag and Content-Length headers can’t be generated for streaming responses.

The StreamingHttpResponse is not a subclass of HttpResponse, because it features a slightly different API. However, it is almost identical, with the following notable differences:

It should be given an iterator that yields bytestrings, memoryview, or strings as content. When serving under WSGI, this should be a sync iterator. When serving under ASGI, then it should be an async iterator.
You cannot access its content, except by iterating the response object itself. This should only occur when the response is returned to the client: you should not iterate the response yourself.

Under WSGI the response will be iterated synchronously. Under ASGI the response will be iterated asynchronously. (This is why the iterator type must match the protocol you’re using.)

To avoid a crash, an incorrect iterator type will be mapped to the correct type during iteration, and a warning will be raised, but in order to do this the iterator must be fully-consumed, which defeats the purpose of using a StreamingHttpResponse at all.
It has no content attribute. Instead, it has a streaming_content attribute. This can be used in middleware to wrap the response iterable, but should not be consumed.
It has no text attribute, as it would require iterating the response object.
You cannot use the file-like object tell() or write() methods. Doing so will raise an exception.

The HttpResponseBase base class is common between HttpResponse and StreamingHttpResponse.

AttributesLink to this heading

StreamingHttpResponse.streaming_contentLink to this definition: An iterator of the response content, bytestring encoded according to HttpResponse.charset.

StreamingHttpResponse.status_codeLink to this definition

The HTTP status code for the response.

Unless reason_phrase is explicitly set, modifying the value of status_code outside the constructor will also modify the value of reason_phrase.

StreamingHttpResponse.reason_phraseLink to this definition

The HTTP reason phrase for the response. It uses the HTTP standard’s default reason phrases.

Unless explicitly set, reason_phrase is determined by the value of status_code.

StreamingHttpResponse.streamingLink to this definition: This is always True.

StreamingHttpResponse.is_asyncLink to this definition

Boolean indicating whether StreamingHttpResponse.streaming_content is an asynchronous iterator or not.

This is useful for middleware needing to wrap StreamingHttpResponse.streaming_content.

Handling disconnectsLink to this heading

If the client disconnects during a streaming response, Django will cancel the coroutine that is handling the response. If you want to clean up resources manually, you can do so by catching the asyncio.CancelledError:

Code

async def streaming_response():
    try:
        # Do some work here
        async for chunk in my_streaming_iterator():
            yield chunk
    except asyncio.CancelledError:
        # Handle disconnect
        ...
        raise


async def my_streaming_view(request):
    return StreamingHttpResponse(streaming_response())

This example only shows how to handle client disconnection while the response is streaming. If you perform long-running operations in your view before returning the StreamingHttpResponse object, then you may also want to handle disconnections in the view itself.

`FileResponse` objectsLink to this heading

class FileResponse(open_file, as_attachment=False, filename='', **kwargs)Link to this definition

FileResponse is a subclass of StreamingHttpResponse optimized for binary files. It uses wsgi.file_wrapper if provided by the wsgi server, otherwise it streams the file out in small chunks.

If as_attachment=True, the Content-Disposition header is set to attachment, which asks the browser to offer the file to the user as a download. Otherwise, a Content-Disposition header with a value of inline (the browser default) will be set only if a filename is available.

If open_file doesn’t have a name or if the name of open_file isn’t appropriate, provide a custom file name using the filename parameter. Note that if you pass a file-like object like io.BytesIO, it’s your task to seek() it before passing it to FileResponse.

The Content-Length header is automatically set when it can be guessed from the content of open_file.

The Content-Type header is automatically set when it can be guessed from the filename, or the name of open_file.

FileResponse accepts any file-like object with binary content, for example a file open in binary mode like so:

Python console

>>> from django.http import FileResponse
>>> response = FileResponse(open("myfile.png", "rb"))

The file will be closed automatically, so don’t open it with a context manager.

MethodsLink to this heading

FileResponse.set_headers(open_file)Link to this definition: This method is automatically called during the response initialization and set various headers (Content-Length, Content-Type, and Content-Disposition) depending on open_file.

`HttpResponseBase` classLink to this heading

class HttpResponseBaseLink to this definition

The HttpResponseBase class is common to all Django responses. It should not be used to create responses directly, but it can be useful for type-checking.

Request and response objectsLink to this heading#

Quick overviewLink to this heading#

HttpRequest objectsLink to this heading#

AttributesLink to this heading#

Attributes set by application codeLink to this heading#

Attributes set by middlewareLink to this heading#

MethodsLink to this heading#

QueryDict objectsLink to this heading#

MethodsLink to this heading#

HttpResponse objectsLink to this heading#

UsageLink to this heading#

Passing stringsLink to this heading#

Passing iteratorsLink to this heading#

Setting header fieldsLink to this heading#

Telling the browser to treat the response as a file attachmentLink to this heading#

AttributesLink to this heading#

MethodsLink to this heading#

HttpResponse subclassesLink to this heading#

Custom response classesLink to this heading#

JsonResponse objectsLink to this heading#

UsageLink to this heading#

Serializing non-dictionary objectsLink to this heading#

Changing the default JSON encoderLink to this heading#

StreamingHttpResponse objectsLink to this heading#

AttributesLink to this heading#

Handling disconnectsLink to this heading#

FileResponse objectsLink to this heading#

MethodsLink to this heading#

HttpResponseBase classLink to this heading#

Request and response objectsLink to this heading

Quick overviewLink to this heading

`HttpRequest` objectsLink to this heading

AttributesLink to this heading

Attributes set by application codeLink to this heading

Attributes set by middlewareLink to this heading

MethodsLink to this heading

`QueryDict` objectsLink to this heading

MethodsLink to this heading

`HttpResponse` objectsLink to this heading

UsageLink to this heading

Passing stringsLink to this heading

Passing iteratorsLink to this heading

Setting header fieldsLink to this heading

Telling the browser to treat the response as a file attachmentLink to this heading

AttributesLink to this heading

MethodsLink to this heading

`HttpResponse` subclassesLink to this heading

Custom response classesLink to this heading

`JsonResponse` objectsLink to this heading

UsageLink to this heading

Serializing non-dictionary objectsLink to this heading

Changing the default JSON encoderLink to this heading

`StreamingHttpResponse` objectsLink to this heading

AttributesLink to this heading

Handling disconnectsLink to this heading

`FileResponse` objectsLink to this heading

MethodsLink to this heading

`HttpResponseBase` classLink to this heading